The right way to Exchange a Garden Irrigation Sprinkler Valve

Sprinkler valve various is required when the sprinklers are leaking or the water just isn’t flowing properly. Altering a valve is an easy-to-moderate job that requires some experience turning into a member of PVC pipe with solvent cement.

When to Substitute a Sprinkler Valve

Frequent indicators of a faulty valve embrace:

• Valve leaks: Leaks throughout the valve or on the sprinkler head farthest from the valve
• Poor water motion: Inadequate water delivered to the sprinkler heads
• Heads that don’t work: Sprinkler heads that don’t come on or pop-ups that don’t elevate

Sooner than You Begin

Purchase a exact various half for the sprinkler valve. When deciding on the model new valve, be sure the PVC adapters match the valve sockets sooner than leaving the store.

These adapters have a male threaded end to connect with the valve and a female slip-fit end designed to be solvent-glued to the PVC irrigation pipe.

Codes and Permits

Many native plumbing codes specify that the anti-siphon sprinkler valve must be as a minimum 6 inches above the perfect sprinkler head within the an identical zone when the head is inside the popped-up place.

Look at alongside along with your native developing division for high requirements. In case your valve is not extreme adequate to fulfill the code requirement, you may wish to make use of couplings and further pipe to spice up the sprinkler valve to a greater place.